web counter

Important Shipping Notice: Due to high order volumes our current shipping time is approximately one week from when the order is placed.

Miscellaneous



Product Image Item Name+ Price
Curtain Motion Detector

Curtain Motion Detector

This is a Curtain Motion Detector. A curtain motion detector is used to detect someone walking across a path. This is much different than a normal motion detector that would be used in a burglar alarm system since those types of motion detectors have a very large field of view. The motion detector can be surface mounted to a surface such as a drywall wall or ceiling. There is also a swivel mount which allows the device to be mounted and aimed...
CAD $49.99


Add:

Gel Filled Wire Crimp Connectors - 40 Pack

Gel Filled Wire Crimp Connectors - 40 Pack

This is a 40 pack of gel filled wire crimp connectors. There are ideal for connecting the 18/2 or 18/3 LVT wire together when wiring up a stair lighting controller kit. The gel in this connector is to prevent moisture from entering the crimp. This will allow the connection to hold up better in damp conditions. This is a permanent type of connection, if you need something that is not permanent please have a look at our wire nuts. The connector...
CAD $7.49


Add:

Large Wire Staples - 10 Pack

Large Wire Staples - 10 Pack

These Large Wire Staples are great for keeping a number of LVT wires in place. This can be handy when running a number of wires to the controller from the individual stair lights. If you need to hold some single LVT cables in place you can use the small insulated wire staple. Please note that this product is packaged by weight.
CAD $2.99


Add:

Low Voltage Single Gang Mounting Ring

Low Voltage Single Gang Mounting Ring

Low voltage mounting ring can be used for class 2 circuits such as the switches used in the stair lighting controllers. To install you will need to cut a rectangular hole into the drywall. The plastic ring is inserted into the hole and when the upper and lower screws are turned to secure it in place the two wings move into position where they hold the low voltage mounting ring in place from the rear. These rings are simple to use when compared...
CAD $5.75


Add:

Mini Curtain Motion Detector

Mini Curtain Motion Detector

This is a Mini Curtain Motion Detector. A curtain motion detector is used to detect someone walking across a path. This is much different than a normal motion detector that would be used in a burglar alarm system since those types of motion detectors have a very large field of view. The motion detector can be surface mounted to a surface such as a drywall wall or ceiling. This device can sense people and animals.  The motion sensors are 7cm...
CAD $49.99


Add:

Power Supply - 12 Volt, 2 Amp

Power Supply - 12 Volt, 2 Amp

12 Volt, 2 Amp DC power supply. The total wattage that this power supply can provide is 24 watts, however for continuous load situations we recommend a maximum of 18 watts.
CAD $19.99


Add:

Small Insulated Wire Staples - 50 Pack

Small Insulated Wire Staples - 50 Pack

These Small Insulated Wire Staples are great for keeping small wires in place, the 2 and 3 conductor LVT type wire that is that is used when wiring up the stair lighting controllers can be held in place very nicely with this staple. If you need to hold many LVT cables in place you can use the large wire staple. Please note that this product is packaged by weight.
CAD $2.99


Add:

Strip Light Connector

Strip Light Connector

This is a Strip Light Connector which can be used to connect wires to LED strip lighting such as our 5 meter LED strip light. To install you need to open the snap cap from the end opposite where the wires exit. Slide the 8mm wide LED strip light into the opening as seen in the pictures below. Please note that the positive (red wire lead) needs to be connected to the side of the lighting strip marked with the + symbol. When the strip light is...
CAD $1.00


... more info

Wire Crimp Cap - 40 Pack

Wire Crimp Cap - 40 Pack

This is a 40 pack of wire crimp caps. There are ideal for connecting the 18/2 or 18/3 LVT wire together when wiring up a stair lighting controller kit. This is a permanent type of connection, if you need something that is not permanent please have a look at our wire nuts. The connector has one open end where the stripped and twisted wires are inserted, the connector is then squeezed using a crimping tool which permanently locks the wires into...
CAD $4.99


Add:

Wire Crimp Connectors - 40 Pack

Wire Crimp Connectors - 40 Pack

This is a 40 pack of wire crimp connectors. There are ideal for connecting the 18/2 or 18/3 LVT wire together when wiring up a stair lighting controller kit. This is a permanent type of connection, if you need something that is not permanent please have a look at our wire nuts. The connector has one open end where the stripped and twisted wires are inserted, the connector is then squeezed using a pair of pliers which permanently locks the...
CAD $4.99


Add:

Wire Nuts - 40 Pack

Wire Nuts - 40 Pack

This is a 40 pack of small wire nuts. There are ideal for connecting the 18/2 or 18/3 LVT wire together when wiring up a stair lighting controller kit. This is a non-permanent type of connection, if you need something that is permanent please have a look at our crimp wire connectors. Please note that this product is packaged by weight.
CAD $4.99


Add: